DIY Simple Glass Etching!

I’ve been wanting to try glass etching for the longest time but I’ve always had this idea that it was going to be way too hard to do. So, I never tried it. Then I found myself roaming the aisles of Michael’s Art Store the other day and came across some etching paint. I went ahead and bought it, came home, pulled out my Dollar Tree vases, and went to work!  I couldn’t believe how easy the entire project was or how nice the results were!! So, for this DIY, I’m going to show you just how easy it is to etch glass.

IMG_9375Here’s what you need:

  • Armour Etch Glass Etching Cream
  • Glass votive, vases, or any glass you’d like to work with
  • Sponge Paint Brush
  • Stencils
  • Wet Cloth or Towel

IMG_9353

The first thing you want to do is choose your stencil. Once you’ve chosen, simply pull it off and apply it to your glass (exactly where you want your design to go). If your stencils are not sticky, simply tape the design to the glass.

IMG_9358When your stencil is in place, grab your sponge brush and dip it into the etching cream and paint a layer directly over your stencil. Keep coating your stencil until there is a thick layer covering the top.

IMG_9366

Let the etching cream sit for at least 5 minutes.

Once the cream has had some time to adhere. Take a damp cloth and wipe the remaining cream off the stencil and glass.

IMG_9368

Then slowly peel the stencil off.

That’s it!! You now have your very own personalized glass etching!

IMG_9375 1

Once you get the hang of doing this and see how easy it is to pull off, you’ll certainly want to give these as gifts for the holidays!!

Thanks for reading! Please remember to like, share, tweet, and pin this post! 🙂

Leave a Reply

Want to see your picture by your comment? Get your custom avatar by registering for free at Gravatar.

Your email address will not be published. Required fields are marked *