DIY Garden Trellis!!

June 18, 2014 2 Comments | Disclosure

TrellisFinal2

I don’t know about you, but my garden has just been growing like crazy this past week. I have waited to put in a trellis for my beans and peas because I have been working on other projects and have been busy harvesting all of the berries that are ripening right now! So this week I finally got around to making a trellis for my bean plants and sugar snap peas. The peas have been trying to vine for a few days, and the beans are just getting there so I knew I had to get going on it quick.

Bean plants

Frugal living and frugal gardening has been a goal of mine this year, so I really like when I am able to do a DIY garden project! I wanted to share my project with you so you can see just how easy (and inexpensive) it is to do this for your own garden.

What you’ll need to make Stand Alone Trellises to use in Raised Garden Beds:

(**Below I will tell you the amount and measurements of each material that I used based on the measurements of my garden boxes. You will need to make adjustments based on the measurements of your boxes.**)

    • 1/2″ PVC Pipes (I needed 4: $6.88)
    • 1/2″ Elbow joint PVC Connectors (I needed 8: $2.24)
    • 1/2″ Two Hole Conduit Straps (I needed 8: $2.18)
    • 1 1/4″ Screws (I already had these.)
    • Garden Twine ($2.98)
    • PVC pipe cutter or hack saw (I already had this.)
    • Drill with drill bit & Philips head bit (I already had this.)
    • Total cost for my trellises: $14.28!! I had originally thought about getting a metal one, but they were over $40 each, so this works really well for me! :)

Shop at Lowe’s at have your materials ready for pick up! Get started here!!

Step 1:

Gather materials and mark off measurements on PVC pipe. I wanted (3) trellises to sit 36″ high and 42″ wide & (1) trellis 48″ high and 42″ wide so marked them as following:

  • Pipe 1 – 36″, 36″, 48″
  • Pipe 2 – 36″, 36″, 48″
  • Pipe 3 – 42″, 42″, 36″
  • Pipe 4 – 42″, 42″, 36″

Pea Materials

Step 2:

Use pipe cutter or hack saw to cut the pipes. **Use extreme caution and follow directions on how to use the cutter or saw!!** After I cut the sections, I laid them out in the garden according to where I wanted them to go.

Pea PVC CutPea PVC PiecesPEa layout

Step 3:

Pre-drill holes into the inside of the garden box and screw the conduit straps down just a little bit. Slide the (height section) pipe into the conduit strap. Once the pipe is in you can fasten the strap tightly. Repeat this step for all pairs of trellises that you are wanting to make.

Pea PVC

Step 4:

Slide the Elbow joint connector onto the top of the height section of pipe. Once you have the elbows on, take the width piece and attach them together.

Pea joints

Step 5:

Cut pieces of garden twine and tie them onto the pipe so they hang down to the plant. I ended up measuring out one of the pieces and then used it as a guide and pre-cut several pieces so that I could work a little faster.

Pea Twine

Step 6:

Gently wrap the plants around the twine to help guide them, or wrap the twine around a rock and place it on the soil if your plants are not ready to vine yet.

Pea Wrap

There you go!! This project took me about an hour from start to finish and tying the twine and wrapping them around the plants was the most time consuming thing. The nice thing about using twine is that at the end of the season you can just cut off the pieces at the top and have a quick garden clean up for your vine plants!!

Pea Finished

 Here are some great deals on tools to get you started on your own Garden Trellis and my favorite gardening book that is FULL of great information!

 

PVC Pipe cutter

PVC Pipe Cutter, 1/2-Inch x 1-Inch – $6.74 (was $21.99)

  • Ships FREE with Prime!
  • Tubing Cutter
  • Cuts pipe sizes 1/2-Inch to 1-Inch
  • Cuts PVC pipe, hose and synthetic tubing
  • Ratchet action
  • Limited Lifetime Warranty

Hacksaw

Stanley Solid Frame High Tension Hacksaw – $10.98 + Free Shipping!

  • 12-Inch Fixed blade length, 4.375-Inch cutting depth
  • 225-Pound blade tension
  • 90-Degree and 180-Degree Adjustable blade angles allowing flush cuts
  • All metal frame
  • Large, comfortable tension knob with a full-grip handle

GardenersBible

The Vegetable Gardener’s Bible, 2nd edition – $1.99 Kindle, $14.30 Paperback

Ships Free with Amazon Prime (Try a FREE Membership)

Ed Smith’s W-O-R-D system has helped countless gardeners grow an abundance of vegetables and herbs. And those tomatoes and zucchini and basil and cucumbers have nourished countless families, neighbors, and friends with delicious, fresh produce.

Amazon Smile Portal

  • See our favorite Amazon Deals!  
  • Want free shipping?  Sign up for Amazon Mom
  • Because Amazon’s prices fluctuate so much and some times so quickly, please don’t be mad at me if you miss this great price!  Also, see why we ♥  Amazon Prime for free shipping!  This post contains our affiliate link. Please read our DISCLOSURE POLICY here.

Comments

  1. Jil Sanchez says:

    Have you planted bush variety or climbing variety of the peas and beans? If they are climbing, is this tall enough for them?
    *New Gardener*

    • Hi Jill!
      The peas are a bush variety, but they’ll still need a little help growing up, so that’s why the trellis is a bit shorter. Last year for my pole beans I used a wooden trellis that was 5′ high. I started with the shorter option but have the opportunity to add on to it with a T bracket and have it keep going up if needed.

Leave a Comment
Want to see your picture by your comment? Get your custom avatar by registering for free at Gravatar.

*